Additionally, Amerex · Ansul Red Line · Buckeye
Wheeled Fire Extinguishers
Furthermore, Sales, annual inspection, recharge, repair, and full rebuild on wheeled fire extinguishers from Amerex, Ansul Red Line, and Buckeye. Moreover, We order direct from all three manufacturers — pricing is below manufacturer's suggested retail. Call to order.
Specifically, By Daniel Beauchesne, Florida State Fire Marshal Licensed Technician · License #EF-0001479 · Class 01 & 04 · 25+ Years · DOT RIN D133
Sales, Service, and Rebuild
Importantly, We are authorized distributors for Amerex, Ansul Red Line, and Buckeye wheeled fire extinguishers. As a result, We order direct from all three manufacturers with typical lead times of 2–3 weeks. Nobody stocks wheeled units — not dealers, not distributors, not even the manufacturers themselves. Every unit is built to order.
In general, We do not publish pricing. In addition, Wheeled units are sold at or below manufacturer's suggested retail — call for current pricing on any model. One wheeled unit order often costs more than a year of portable extinguisher service for an entire facility. We treat these orders accordingly.
For instance, Beyond sales, we perform annual inspection, recharge, 6-year internal maintenance, hydrostatic testing, repair, and full rebuild on all three brands. Notably, Most dealers will sell you a wheeled unit and point you back to the manufacturer if something needs work. We handle the full service lifecycle in-house.
What We Do With Wheeled Units
Amerex Wheeled Extinguishers
Authorized Distributor
In fact, Amerex manufactures the most comprehensive line of wheeled extinguishers available — stored pressure, direct pressure, Z-Series high performance, CO2, Halotron I, SF 1230 clean agent, and Class D. Similarly, All Amerex wheeled units are manufactured to order with a 2–3 week lead time. We are Ansul, Pyro-Chem, Amerex and Buckeye Authorized Distributors. Pricing not published — call for current pricing.
Stored Pressure — ABC & Purple K
| Model | Agent | Capacity | UL Rating | Range | Warranty |
|---|---|---|---|---|---|
| 495 | ABC | 50 lb | 20A:160B:C | 25–35 ft | 6-year |
| 497 | Purple K | 50 lb | 160B:C | 25–35 ft | 6-year |
| 488 | ABC | 125 lb | 30A:240B:C | 30–40 ft | 6-year |
| 490 | Purple K | 125 lb | 320B:C | 30–40 ft | 6-year |
High Performance Z-Series — Superior Corrosion Resistance
Consequently, Proprietary zinc-enriched corrosion-resistant coating — the only UL-verified corrosion-resistant wheeled extinguisher on the market. In practice, Designed for offshore platforms, coastal environments, oil & gas, mining, and chemical facilities. 12-year warranty.
| Model | Agent | Capacity | UL Rating | Range | Flow Rate |
|---|---|---|---|---|---|
| 756 | ABC | 250 lb | 40A:160B:C | 60–80 ft | 4.8 lb/sec |
| 758 | Purple K | 125 lb | 160B:C | 50–55 ft | 6.6 lb/sec |
| 759 | Purple K | 125 lb | 120B:C | 50–55 ft | 5.2 lb/sec |
Direct Pressure — 125 lb & 300 lb
In short, Nitrogen cylinder-operated. In particular, Quick-opening brass valve for instant actuation. "R" models available with non-sparking rubber treads for use in volatile environments.
| Model | Agent | Capacity | UL Rating | Range | Nitrogen Cyl. |
|---|---|---|---|---|---|
| 450 | ABC | 125 lb | 30A:240B:C | 30–40 ft | 23 cu ft |
| 452 | Purple K | 125 lb | 320B:C | 30–40 ft | 23 cu ft |
| 491 | ABC | 300 lb | 40A:320B:C | 30–40 ft | 55 cu ft |
| 493 | Purple K | 300 lb | 320B:C | 30–40 ft | 55 cu ft |
CO2 Wheeled
| Model | Capacity | UL Rating |
|---|---|---|
| 333 | 50 lb CO2 | 20B:C |
| 334 | 100 lb CO2 | 20B:C |
Clean Agent & Class D
| Model | Agent | Capacity |
|---|---|---|
| B673 | Halotron I | 65 lb |
| B674 | Halotron I | 150 lb |
| B675 | Halotron I | 150 lb alt |
| 775 | SF 1230 | 150 lb |
| 680R | Class D — Sodium Chloride | 150 lb |
| 681R | Class D — Copper Powder | 250 lb |
For example, Note: Halotron I pricing subject to change due to HFC phasedown. Also, Call for current pricing.
Ansul Red Line Wheeled Extinguishers
Authorized Distributor
Additionally, Ansul Red Line wheeled extinguishers are the heavy-duty industrial standard — built for refineries, chemical plants, offshore platforms, loading racks, fuel storage areas, airports, and heavy manufacturing. Furthermore, Two primary sizes: 150-C (125–150 lb) and 350-C (300–350 lb), each available in multiple agent and option configurations.
| Model | Agent / Capacity | UL Rating | Range | Approvals |
|---|---|---|---|---|
| CR-I-150-C | PLUS-FIFTY C / 150 lb | 160B:C | 25 ft | UL, FM, USCG |
| CR-I-A-150-C / RL-A-150-D | FORAY (ABC) / 125 lb | 30A:160B:C | 25 ft | UL, ULC, FM, USCG |
| CR-I-K-150-C | Purple-K / 125 lb | 320B:C | 25 ft | UL, ULC, FM, USCG |
| CR-LR-I-K-150-C | Purple-K / 125 lb — Long Range | 80B:C | 35 ft | UL, ULC, FM, USCG |
| CR-I-350-C | PLUS-FIFTY C / 350 lb | 240B:C | 30 ft | UL, FM, USCG |
| CR-I-A-350-C | FORAY (ABC) / 300 lb | 40A:240B:C | 30 ft | UL, FM, USCG |
| CR-I-K-350-C | Purple-K / 300 lb | 480B:C | 30 ft | UL, ULC, FM, USCG |
| CR-LR-I-K-350-C | Purple-K / 300 lb — Long Range | 160B:C | 40 ft | UL, FM, USCG |
Buckeye Wheeled Extinguishers
Authorized Distributor
Specifically, Buckeye wheeled extinguishers are American-made in Kings Mountain, NC and cover dry chemical in stored pressure, regulated pressure, and pressure transfer configurations, plus CO2 and Halotron I. In general, Suitable for offshore rigs, ship docks, refineries, chemical plants, aircraft ramps, remote construction sites, and processing plants. All models are rechargeable and meet UL/ULC/TC and DOT requirements.
Dry Chemical — Stored Pressure
| Model | Agent | Capacity / UL |
|---|---|---|
| A-150-SP | ABC | 125 lb / 30A:240B:C |
| K-150-SP (P/N 30310) | Purple K | 125 lb / 320B:C |
Dry Chemical — Regulated Pressure
| Model | Agent | Capacity |
|---|---|---|
| K-150-RG (P/N 31320 / 31340 / 31350) | Purple K | 125 lb |
| A-350-RG | ABC | 300 lb |
Dry Chemical — Pressure Transfer
| Model | Agent | Capacity |
|---|---|---|
| K-150-PT (P/N 30310 rubber wheel) | Purple K | 125 lb |
| K-350-PT (P/N 32310 / 32330) | Purple K | 300 lb |
Carbon Dioxide
| Model | Capacity | Part No. |
|---|---|---|
| C-50-SE | 50 lb CO2 | 35050 |
| C-100-SE | 100 lb CO2 | 35100 |
Halotron I — Clean Agent
| Model | Capacity | Part No. |
|---|---|---|
| W-65 | 65 lb Halotron I | 76501 |
| W-150 | 150 lb Halotron I | 71501 |
Moreover, Halotron I pricing subject to change due to HFC phasedown. For instance, Call for current pricing.
Note on Buckeye
Importantly, Buckeye also offers specialty offshore configurations and a MET-L-KYL dry chemical unit for Class B metal-organic compound hazards. As a result, If your application falls outside the standard models listed, call us — we can source the correct Buckeye configuration for your specific hazard.
Repair and Rebuild — What Most Dealers Cannot Do
In addition, A wheeled extinguisher is a significant capital investment — units in the $1,500 to $5,000+ range are not disposable equipment. In particular, When something breaks or fails inspection, the right answer is usually repair or rebuild, not replacement. We perform full wheeled unit service in-house.
Valve Service & Replacement
Notably, Discharge valves, nitrogen cylinder valves, and quick-opening valves all wear over time. Also, We inspect, service, and replace valves on all three brands in-house. A valve replacement is a fraction of the cost of a new unit — and extends the service life of a perfectly good cylinder by years.
Hose Assembly Replacement
In fact, Discharge hoses on wheeled units take punishment — UV exposure, dragging, chemical contact, and physical damage. Additionally, Cracked, brittle, or damaged hoses fail NFPA 10 inspection and must be replaced. We replace hose assemblies on all three brands with OEM-spec components.
Nitrogen Cylinder Replacement & Testing
Consequently, Direct pressure and regulated pressure wheeled units rely on an attached nitrogen cylinder as the sole propellant. Furthermore, These cylinders require periodic hydrostatic testing (DOT 3AA2015) and occasional replacement. We are DOT-authorized (RIN D133) and perform this work in-house — rare in this market.
Full Unit Rebuild
In short, When a wheeled unit has been in service for years or has sustained damage, a full rebuild restores it to like-new service condition — complete disassembly, internal inspection and cleaning, replacement of all wear components, new agent, recharge, hydrostatic testing if due, and recertification. Specifically, Cost-effective compared to a new unit at current pricing.
Carriage and Wheel Repair
For example, Damaged carriages, bent frames, and worn wheels affect both mobility and the structural protection the carriage provides to the cylinder and valve assembly. Moreover, We assess carriage condition as part of annual inspection and perform repairs or component replacement as needed.
6-Year Internal Maintenance
Similarly, NFPA 10 requires full internal maintenance on wheeled extinguishers every 6 years — complete disassembly, internal inspection, agent replacement, valve component service, recharge. Importantly, This work is required for compliance regardless of visible condition. We perform 6-year maintenance on all three brands we carry.
Real Talk
In practice, Most dealers who sell wheeled units have never taken one apart. In general, When a valve needs service or a nitrogen cylinder is out of hydrostatic test, they either tell you to call the manufacturer or tell you to buy a new unit. We have been doing this since 1999. A wheeled unit that is mechanically sound but needs a valve or hose replacement should not be replaced — it should be repaired. Call us before you buy a new one.
Where Wheeled Extinguishers Are Used
For instance, Wheeled extinguishers are required by NFPA 10, OSHA, and industry-specific codes wherever the hazard exceeds what a hand-portable unit can address. As a result, Common applications include facilities with large flammable liquid surface areas, pressurized fuel systems, or high-value equipment where rapid large-volume suppression is required.
Airports & Aviation
Aircraft hangars, fueling areas, ramp operations — FAA and NFPA 409 requirements
Oil & Gas
Refineries, loading racks, fuel storage, offshore platforms, tank farms
Chemical Plants
Processing areas, loading docks, solvent storage, reaction vessels
Heavy Manufacturing
Paint spray booths, dip tanks, quench tanks, steel & iron mills
Marine & Shipyards
Ship docks, vessel maintenance facilities, fueling stations, dry docks
Military & Defense
Military bases, vehicle depots, ordnance storage, fuel handling facilities
Frequently Asked Questions
How long does it take to get a wheeled extinguisher?
In addition, All wheeled extinguishers are manufactured to order — Amerex, Ansul Red Line, and Buckeye all build on demand. Similarly, Typical lead time is 2–3 weeks from order to delivery. Nobody stocks these units. If you need one faster, call us and we will check current manufacturer lead times — they can vary by model and current production schedule.
Do you publish pricing on wheeled extinguishers?
Notably, We do not publish pricing online. In practice, We sell at or below manufacturer's suggested retail pricing. Call us with the model number or your application requirements and we will provide current pricing. Wheeled unit prices vary meaningfully by model and agent type — a 50 lb stored pressure ABC unit and a 300 lb direct pressure Purple K are very different price points.
Which brand should I choose — Amerex, Ansul Red Line, or Buckeye?
In fact, All three are high-quality industrial manufacturers and the choice often comes down to what the facility has historically used, what the AHJ (Authority Having Jurisdiction) specifies, and what specific model features your hazard requires. In particular, Ansul Red Line is the historical standard in heavy industrial and offshore applications. Amerex's Z-Series is the standout for harsh corrosive environments. Buckeye is an excellent value with strong American manufacturing credentials. Call us and tell us about your application — we will help you identify the right choice.
Can you service wheeled extinguishers we didn't buy from you?
Consequently, Yes. Also, We perform annual inspection, recharge, 6-year maintenance, hydrostatic testing, repair, and rebuild on Amerex, Ansul Red Line, and Buckeye wheeled units regardless of where they were originally purchased. Bring the unit to our St. Petersburg facility or contact us about shipping for out-of-area customers.
What is the difference between stored pressure, direct pressure, and regulated pressure wheeled units?
In short, Stored pressure units keep agent and nitrogen propellant together in the same cylinder — simple, cost-effective, and easy to service. Additionally, Direct pressure units use a separate attached nitrogen cylinder connected by valve — faster actuation, higher range, better suited for severe environments. Regulated pressure units use an attached nitrogen cylinder with a regulator that maintains constant discharge pressure across varying temperatures, providing more consistent performance in extreme temperature environments. The right configuration depends on your specific application, operating temperature range, and response time requirements.
How often do wheeled extinguishers need service under NFPA 10?
For example, NFPA 10 requires monthly visual inspection, annual maintenance inspection and certification, 6-year internal maintenance (full disassembly, agent replacement, valve service, recharge), and hydrostatic testing on a schedule that depends on cylinder specification — typically every 12 years for agent cylinders and on a separate schedule for nitrogen cylinders. Furthermore, We perform all of these services in-house. Our annual inspection service and hydrostatic testing both cover wheeled units.
Amerex · Ansul Red Line · Buckeye
Call to Order or Schedule Service
Specifically, New units, recharge, annual inspection, repair, or full rebuild — call with the model number or describe your application and we will identify the right unit and current pricing. Importantly, Pricing is at or below manufacturer's suggested retail. 2–3 week lead time on new units.
Location
St. Petersburg, FL 33702
Just off I-275
Lead Time
New units to order
All brands, all models
Pricing
Not published online
Call for current pricing
Credentials
FL Licensed Class 01 & 04
Licensed since 1999
Moreover, Serviced Fire Equipment Inc. In general, · Authorized distributor for Amerex, Ansul Red Line, and Buckeye wheeled fire extinguishers · Full in-house service including repair and rebuild · DOT-authorized hydrostatic testing RIN D133 · Florida State Fire Marshal Class 01 & 04